Leads for 3D operations
Sl - Safe level
LD - Leads
Application Area:
Allows you to add additional engage and retract to the working moves using their feed.
Engage.
Click here to expand..
Off. The Engage and Retract toolpath parts is not generated.
.png)
Vertical. The engage is performed vertical to the first point of the work pass.
.png)
Horizontal. The engage is performed perpendicular to the tool axis to the first point of the work pass
.png)
Angle to Z Axis. The engage is performed by angle to vertical to the first machining point
.png)
By Normal. The engage is performed along the normal to surface at the first point of the work pass
.png)
By Tangent. The engage is performed tangentially to the first machining point
.png)
Angle to Tangent. The engage is performed by angle to tangent to the first machining point
.png)
By Arc. The system adds an arc to the first point on the curve using the defined radius.
.png)
By Arc (Angle). The system adds an arc to the first point on the curve using the defined radius. The arc angle is constructed from the tangent of the work pass.
).png)
Depending on the engage, it becomes possible to control additional parameters:
Length (Radius). Changes the length
.png)
.png)
Angle. Changes the vertical angle
.png)
Retract.
Click here to expand..
Off. The Engage and Retract toolpath parts is not generated.
.png)
Vertical. The retract is performed vertical to the last point of the work pass.
.png)
Horizontal. The retract is performed perpendicular to the tool axis to the last point of the work pass
.png)
Angle to Z Axis. The retract is performed by angle to vertical to the last machining point
.png)
By Normal. The retract is performed along the normal to surface at the last point of the work pass
.png)
By Tangent. The retract is performed tangentially to the last machining point
.png)
Angle to Tangent. The retract is performed by angle to tangent to the last machining point
.png)
By Arc. The system adds an arc to the last point on the curve using the defined radius.
.png)
By Arc (Angle). The system adds an arc to the last point on the curve using the defined radius. The arc angle is constructed from the tangent of the work pass.
).png)
Depending on the engage, it becomes possible to control additional parameters:
Length (Radius). Changes the length
.png)
.png)
Angle. Changes the vertical angle
.png)