Part-off with takeover

Application area:

The purpose of this operation is to cut off the processed part from the leftover workpiece material, while simultaneously forming the back end of the part, including creating a chamfer or radius on it. One can prepare the workpiece before parting off, for example, by machining a groove. Differs from Lathe part-off operation in that at the end of the operation the workpiece is moved to another spindle.

Setup:

The Setup tab is used to configure the primary parameters of the project. This can involve the positioning of the part on the equipment, the coordinate system of the part, and more. See more

Job assignment:

Part-off. Executes the cut off the processed part from the leftover material of the workpiece, while also machining the back face of the part. The system generates the working cycle's contour as a vertical line connecting the outer and inner diameters of the workpiece on the part's right or left side.

Profile. The system forms a single pass, the toolpath of which is identical to the geometric contour of the part. User can add engage/retract; shifting by stock values; tool unreachable gray zones excluding; tool radius compensating to the toolpath. See more

Grooving cycle. The system outputs the part-off operation into the NC program as either an ISO G75 or ISO G74 cycle.

Slotting. This cycle efficiently machines simple rectangular grooves with a minimum number of actions. See more

Grooves. This cycle is similar to Roughing, but it outputs the machining process to NC program as a cycle similar to ISO G71/ G72. See more

Zigzag. The tool removes the rough stock layer by layer. In each layer, it plunges downwards to the cutting depth and performs horizontal movement. Thus, horizontal passes with alternating directions remove the entire rough stock, layer by layer. See more

Properties. Displays the properties of the selected element. You can additionally add allowance. You can call the Properties menu by double-clicking on the selected element.

Delete. Removes an item from the list.

CycleParams:

Some parameter group works similarly to the Lathe part-off operation operations. See more

Some parameter group works similarly to the Turn take over operations. See more

Transformations:

Parameter's kit of operation, which allow to execute converting of coordinates for calculated within operation the trajectory of the tool. See more