Interface INCT_CLData

CAM system interface, which implements the commands for the formation of the tool path, using machine axes

Namespace: STNCInterpreter

Assembly: STNCInterpreter.dll

Syntax

[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
[Guid("F1996BF5-89CA-49D4-A667-79846F9EB459")]
public interface INCT_CLData

Methods

AddCircle(TNC3DPoint, TNC3DPoint, double, TNCPlaneType, bool)

Declaration

void AddCircle(TNC3DPoint P, TNC3DPoint Pc, double R, TNCPlaneType Plane, bool CanBeFull)

Parameters

Type	Name	Description
TNC3DPoint	P
TNC3DPoint	Pc
double	R
TNCPlaneType	Plane
bool	CanBeFull

AddCoolant(bool, int)

Declaration

void AddCoolant(bool OnOff, int PipeNumber)

Parameters

Type	Name	Description
bool	OnOff
int	PipeNumber

AddDelay(double)

Declaration

void AddDelay(double Value)

Parameters

Type	Name	Description
double	Value

AddLengthCompensation(TNCLengthCompensationMode, int)

Declaration

void AddLengthCompensation(TNCLengthCompensationMode Mode, int OffsetNumber)

Parameters

Type	Name	Description
TNCLengthCompensationMode	Mode
int	OffsetNumber

AddLengthCompensationValue(TNCLengthCompensationMode, int, double)

Declaration

void AddLengthCompensationValue(TNCLengthCompensationMode Mode, int OffsetNumber, double Value)

Parameters

Type	Name	Description
TNCLengthCompensationMode	Mode
int	OffsetNumber
double	Value

AddLengthCompensationWithSpecifiedAxis(TNCLengthCompensationMode, int, int)

Declaration

void AddLengthCompensationWithSpecifiedAxis(TNCLengthCompensationMode Mode, int SpecifiedAxis, int OffsetNumber)

Parameters

Type	Name	Description
TNCLengthCompensationMode	Mode
int	SpecifiedAxis
int	OffsetNumber

AddMotion(int, double)

Declaration

void AddMotion(int AxisIndex, double Value)

Parameters

Type	Name	Description
int	AxisIndex
double	Value

AddOpStop()

The method adds an optional command to the G-code in the tool path. When this optional stop block is reached, execution halts only if the corresponding mode is enabled in the NC rack; otherwise, it continues. There are no input or output parameters

Declaration

void AddOpStop()

AddOrigin(double)

Declaration

void AddOrigin(double WCSNumber)

Parameters

Type	Name	Description
double	WCSNumber

AddOriginByShift(TNC3DPoint)

Declaration

void AddOriginByShift(TNC3DPoint Shift)

Parameters

Type	Name	Description
TNC3DPoint	Shift

AddOriginByShiftAndRotate(TNC3DPoint, double, double, double, TNCEulerAnglesConvention, bool, bool)

Declaration

void AddOriginByShiftAndRotate(TNC3DPoint Shift, double Ang1, double Ang2, double Ang3, TNCEulerAnglesConvention Convention, bool RotationsAroundMovableAxes, bool AnglesInDegrees)

Parameters

Type	Name	Description
TNC3DPoint	Shift
double	Ang1
double	Ang2
double	Ang3
TNCEulerAnglesConvention	Convention
bool	RotationsAroundMovableAxes
bool	AnglesInDegrees

AddRadiusCompensation(TNCRadiusCompensationMode, int)

Declaration

void AddRadiusCompensation(TNCRadiusCompensationMode Mode, int OffsetNumber)

Parameters

Type	Name	Description
TNCRadiusCompensationMode	Mode
int	OffsetNumber

AddRadiusCompensationValue(TNCRadiusCompensationMode, int, double, double)

Declaration

void AddRadiusCompensationValue(TNCRadiusCompensationMode Mode, int OffsetNumber, double Value, double Value2)

Parameters

Type	Name	Description
TNCRadiusCompensationMode	Mode
int	OffsetNumber
double	Value
double	Value2

AddSinglePassThread(TNCThreadOrientation, TNCThreadLeadType, double, double)

Declaration

void AddSinglePassThread(TNCThreadOrientation Orient, TNCThreadLeadType LeadType, double Step, double StartAngle)

Parameters

Type	Name	Description
TNCThreadOrientation	Orient
TNCThreadLeadType	LeadType
double	Step
double	StartAngle

AddSpindleOff()

The method adds a command to turn off the active spindle in the tool movement path. There are no input or output parameters

Declaration

void AddSpindleOff()

AddSpindleOrient(double)

Declaration

void AddSpindleOrient(double OrientationAngle)

Parameters

Type	Name	Description
double	OrientationAngle

AddSpindleSpeedOnCSS(double, double, int, bool)

Declaration

void AddSpindleSpeedOnCSS(double CSS, double MaxRPM, int Range, bool Direction)

Parameters

Type	Name	Description
double	CSS
double	MaxRPM
int	Range
bool	Direction

AddSpindleSpeedOnRPM(double, int, bool)

Declaration

void AddSpindleSpeedOnRPM(double RPM, int Range, bool Direction)

Parameters

Type	Name	Description
double	RPM
int	Range
bool	Direction

AddStop()

The method adds a command to interrupt the execution of the control program in the tool movement path. When this stop frame is reached, G-code execution is halted. There are no input or output parameters

Declaration

void AddStop()

AddTooltipMotion(int, double)

Declaration

void AddTooltipMotion(int AxisIndex, double Value)

Parameters

Type	Name	Description
int	AxisIndex
double	Value

CloseMultiMotion()

The method marks the end of multi-axis displacement input and adds the corresponding multi-coordinate displacement command to the toolpath, which is formed from the displacements added via AddMotion since the OpenMultiMotion command

Declaration

void CloseMultiMotion()

CloseTooltipMotion()

The method marks the end of displacement input and adds a multi-coordinate movement command to the toolpath, formed from movements added via Tooltip commands since OpenTooltipMotion

Declaration

void CloseTooltipMotion()

CreateCircularMotionFormer()

Returns the arc path maker interface (INCT_CircularMotionFormer), simplifying arc path creation. No input parameters

Declaration

object CreateCircularMotionFormer()

Returns

Type	Description
object

CreateDrillingCycleFormer(TNCDrillingCycleType)

Declaration

object CreateDrillingCycleFormer(TNCDrillingCycleType CycleType)

Parameters

Type	Name	Description
TNCDrillingCycleType	CycleType

Returns

Type	Description
object

CreateLatheCycleFormer(TNCLatheCycleType)

Declaration

object CreateLatheCycleFormer(TNCLatheCycleType CycleType)

Parameters

Type	Name	Description
TNCLatheCycleType	CycleType

Returns

Type	Description
object

CreateLinearMotionFormer()

Returns the linear motion generator interface (INCT_LinearMotionFormer), simplifying linear tool path creation. No input parameters

Declaration

object CreateLinearMotionFormer()

Returns

Type	Description
object

GetActiveSpindle()

The function returns the index of the active spindle

Declaration

int GetActiveSpindle()

Returns

Type	Description
int

GetAxisValue(int)

Declaration

double GetAxisValue(int Index)

Parameters

Type	Name	Description
int	Index

Returns

Type	Description
double

GetFeedrateUnits()

The function returns the current feed units (TNCFeedrateMeasure)

Declaration

TNCFeedrateMeasure GetFeedrateUnits()

Returns

Type	Description
TNCFeedrateMeasure

GetSystemUnits()

The function returns project units of measurement (TNCSystemMeasure)

Declaration

TNCSystemMeasure GetSystemUnits()

Returns

Type	Description
TNCSystemMeasure

LoadTool(int)

Declaration

void LoadTool(int ToolID)

Parameters

Type	Name	Description
int	ToolID

OpenMultiMotion(TNCGotoMode)

Declaration

void OpenMultiMotion(TNCGotoMode GotoMode)

Parameters

Type	Name	Description
TNCGotoMode	GotoMode

OpenTooltipMotion(TNCTooltipMode)

Declaration

void OpenTooltipMotion(TNCTooltipMode Mode)

Parameters

Type	Name	Description
TNCTooltipMode	Mode

OutCylindricalInterpolation(bool, double)

Declaration

void OutCylindricalInterpolation(bool Enable, double Radius)

Parameters

Type	Name	Description
bool	Enable
double	Radius

OutFeed(TNCFeedType, double, bool)

Declaration

void OutFeed(TNCFeedType Feed, double Value, bool mpm)

Parameters

Type	Name	Description
TNCFeedType	Feed
double	Value
bool	mpm

OutPolarInterpolation(bool)

Declaration

void OutPolarInterpolation(bool Enable)

Parameters

Type	Name	Description
bool	Enable

OutStandardFeed(TNCFeedType)

Declaration

void OutStandardFeed(TNCFeedType Feed)

Parameters

Type	Name	Description
TNCFeedType	Feed

ResetOrigin()

The method add toolpath command turns off the shifting and turning of the coordinate system specified in AddOriginByShiftAndRotate

Declaration

void ResetOrigin()

SetActiveSpindle(int)

Declaration

void SetActiveSpindle(int Number)

Parameters

Type	Name	Description
int	Number

SetCurrentPlane(TNCPlaneType)

Declaration

void SetCurrentPlane(TNCPlaneType Plane)

Parameters

Type	Name	Description
TNCPlaneType	Plane

SetFeedrateUnits(TNCFeedrateMeasure)

Declaration

void SetFeedrateUnits(TNCFeedrateMeasure Units)

Parameters

Type	Name	Description
TNCFeedrateMeasure	Units

SetRTCPMode(bool)

Declaration

void SetRTCPMode(bool Enable)

Parameters

Type	Name	Description
bool	Enable

SetSystemUnits(TNCSystemMeasure)

Declaration

void SetSystemUnits(TNCSystemMeasure Units)

Parameters

Type	Name	Description
TNCSystemMeasure	Units

SetTooltipAttitude(double, double, double, TNCEulerAnglesConvention, bool, bool)

Declaration

void SetTooltipAttitude(double Ang1, double Ang2, double Ang3, TNCEulerAnglesConvention Convention, bool RotationsAroundMovableAxes, bool AnglesInDegrees)

Parameters

Type	Name	Description
double	Ang1
double	Ang2
double	Ang3
TNCEulerAnglesConvention	Convention
bool	RotationsAroundMovableAxes
bool	AnglesInDegrees

SetTooltipAttitude2(double, double, double, double)

Declaration

void SetTooltipAttitude2(double qx, double qy, double qz, double qw)

Parameters

Type	Name	Description
double	qx
double	qy
double	qz
double	qw

SetTooltipFlip(TNCFlipType, bool)

Declaration

void SetTooltipFlip(TNCFlipType FlipType, bool Value)

Parameters

Type	Name	Description
TNCFlipType	FlipType
bool	Value

SetTooltipPosition(TNC3DPoint)

Declaration

void SetTooltipPosition(TNC3DPoint P)

Parameters

Type	Name	Description
TNC3DPoint	P

WasAxisMovement(int)

Declaration

bool WasAxisMovement(int Index)

Parameters

Type	Name	Description
int	Index

Returns

Type	Description
bool