Operation hierarchy reference
XML paths in this article refer to configuration files in the installed CAM system (
$(SCHEMAS_FOLDER)), not manual attachments. Available files depend on the version and configuration.
⚙️ Auto-generated — do not edit by hand. This page is produced by
docs/xml-properties/gen-operation-hierarchy.pyfrom a registry snapshot joined with the Supplement XML. Re-run that script to refresh it; manual edits are overwritten.
This appendix to Operation XML descriptors maps the full inheritance tree of the technological-operation descriptors that ship with the CAM system. Use it to choose a base type to inherit from: find the shipped operation closest to what you want, then derive your operation from it (or from one of its bases).
The data combines the operation registry reported by the running system with the descriptor declarations in the XML files, so IDs, captions, parents, container classes, container IDs, solvers and source files are the real, current values.
How to read this table
- Rows are ordered depth-first from the most abstract root
(
TOperationDescriptor) down to concrete operations. The Lvl column gives the inheritance depth and Parent names the type each row derives from; together with the ordering they reconstruct the full tree. - ID — the descriptor ID. This is the
type=value you put on your own operation to inherit from it, and (for concrete operations) theTypeNameused in the registration record. Always shown, including for abstract base types. - Caption — the human-readable name shown in the UI.
- Parent — the descriptor this one derives from.
- Container class / ContainerID — the Delphi container that represents the
operation in the operation tree, builds the instance from the XML descriptor,
owns it, and either computes the toolpath itself or delegates to a solver. The
cell shows the class name on the first line and its class GUID (
ContainerID) on the second. See Container, solver and toolpath in section 4.3. Every operation has a container. Abstract base types (rows that are not registered, instantiable operations) show the container they declare or inherit; the most abstract descriptors fall back to the base containerTSTAbstractTechOp. Abstract bases are often the best inheritance targets for a new operation. - Solver class / SolverID — the toolpath solver, shown the same way as the
container: the implementing Delphi class on the first line and its
SolverIDon the second. Blank means the operation uses the shared default solver framework (and, when it has no separate solver, its container class computes the toolpath directly). Only operations with a dedicated solver show a value here. - Declared in — the XML file (relative to the
Supplementfolder) that declares the descriptor. Open it to study the full descriptor.
Picking a base. For a new milling operation the usual targets are
TST3DMillOp(3D) orTSTAbstract5DOp(3D/5D), or a concrete sibling you want to resemble. For lathe, derive fromAbstractLatheOPorLatheContouringOp. For an operation whose toolpath is computed by your own CAM API extension, derive from an extension base (e.g.TSTMillExtensionOp) and setSolverIDto your extension's id - see section 4.3.
Maintenance. This page is generated by
docs/xml-properties/gen-operation-hierarchy.pyfrom a registry snapshot (data/WholeOpList.json) joined with the Supplement XML. Re-run that script after refreshing the snapshot from a newer build. A few internal/encrypted operation types are intentionally omitted.
145 registered operations + 50 abstract base types = 195 entries.
Full hierarchy
| Lvl | ID | Caption | Parent | Container class / ContainerID | Solver class / SolverID | Declared in |
|---|---|---|---|---|---|---|
| 0 | TOperationDescriptor |
Operation descriptor | TOperationPublicDescription |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractOP.xml |
|
| 1 | TAbstractTechnologicalOperation |
Abstract Technological Operation | TOperationDescriptor |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractOP.xml |
|
| 2 | TAbstractExternalOperation |
Abstract external operation | TAbstractTechnologicalOperation |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractExtOp.xml |
|
| 3 | AbstractOP |
Abstract operation | TAbstractExternalOperation |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractExtOp.xml |
|
| 4 | AbstractTurnOP |
Abstract Turn operation | AbstractOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
Operations/AbstractTurnOP.xml |
|
| 5 | AbstractAxialOP |
Abstract Axial OP | AbstractTurnOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
Operations/AbstractAxialOP.xml |
|
| 6 | LatheDrillOp |
Lathe drilling (obsolete) | AbstractAxialOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TLatheDrillOp{1445D6B7-0006-4F3B-B9AF-06255D7AC38B} |
Operations/LatheDrilling.xml |
| 5 | AbstractLatheOP |
Abstract Lathe OP | AbstractTurnOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
Operations/AbstractLatheOP.xml |
|
| 6 | TNCLatheOp |
G-code based lathe | AbstractLatheOP |
TNCLatheOp{CE71FFAF-DCFD-434C-9EDB-187F0B47FD58} |
Operations/NCLatheOperation.xml |
|
| 6 | LatheContouringOp |
Lathe contouring | AbstractLatheOP |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLatheFaceMachining |
Lathe facing | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLathePartOff |
Lathe part-off | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 8 | TPartOffWithTakeover |
Part-off with takeover | TLathePartOff |
TSTPartOffWithTakeover{B9A194EC-12B3-48F0-8958-718D2276D69D} |
Operations/PartOffWithTakeover.xml |
|
| 7 | TLatheODAdaptive |
OD Adaptive turning | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLatheODFinishing |
OD Finishing | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 8 | TLatheIDFinishing |
ID Finishing | TLatheODFinishing |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLatheODGrooving |
OD Grooving | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 8 | TLatheFaceGrooving |
Face grooving | TLatheODGrooving |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 8 | TLatheIDGrooving |
ID Grooving | TLatheODGrooving |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLatheODTurning |
OD Roughing | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 8 | TLatheIDTurning |
ID Roughing | TLatheODTurning |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLatheODThreading |
OD Threading | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 8 | TLatheIDThreading |
ID Threading | TLatheODThreading |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 7 | TLatheProfileThreading |
Profile threading | LatheContouringOp |
TSTLatheContouring{6B3F2DDC-A312-4BB4-8B55-B1250BFAA6DF} |
Operations/LatheContouring.xml |
|
| 6 | LatheFacingOp |
Lathe facing (obsolete) | AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TApRetMaker{301F6C21-2499-4514-83D1-72A4931529BE} |
Operations/LatheFacing.xml |
| 6 | LatheFinishOp |
Lathe finishing (obsolete) | AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TFinishApRet{ED06D20C-844D-439F-8E05-986C6934AE04} |
Operations/LatheFinish.xml |
| 6 | LatheGroovOp |
Lathe grooving (obsolete) | AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TGrooveOp{0316AE41-3636-4BE9-829B-DF06EE5B67FF} |
Operations/LatheGroove.xml |
| 6 | LathePartOff |
Lathe part-off (obsolete) | AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TCutOffOp{71606D33-F543-4056-9A38-FF14D053F28C} |
Operations/LatheCut.xml |
| 6 | LatheRoughOp |
Lathe roughing (obsolete) | AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TControlApRet{384F541C-1867-413D-A73E-BAC1405CE29B} |
Operations/LatheRough.xml |
| 6 | LatheThreadOp |
Lathe threading (obsolete) | AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
TThreadOp{FAD79D4F-5558-4BEA-BE55-A50AC1F406CD} |
Operations/LatheThread.xml |
| 6 | LatheContouringOP |
AbstractLatheOP |
TSCLatheExtOpConnector{E05F6B10-19BF-4755-9185-055853197E99} |
Operations/LatheContouring.xml |
||
| 7 | TSTLatheContouringCopy |
Copy of lathe operation | LatheContouringOP |
TSTLatheContouringCopy{F35539E7-F3FE-47D6-8A4F-311A7425A7D7} |
Operations/LatheContouring.xml |
|
| 4 | AbstractAuxiliaryOp |
Auxiliary operation | AbstractOP |
TSCAuxiliaryOp{4B61AE6C-BB81-4AD1-839A-0BD50696AD26} |
Operations/AbstractAuxiliaryOp.xml |
|
| 5 | TSTAuxOpCopy |
Copy of auxiliary operation | AbstractAuxiliaryOp |
TSTAuxOpCopy{CDD784B2-1739-4E31-91E7-862D46EB22EB} |
Operations/AbstractAuxiliaryOp.xml |
|
| 2 | TSTAbstractMillOp |
Abstract mill operation | TAbstractTechnologicalOperation |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractMillOP.xml |
|
| 3 | TSTMillOpCopy |
Copy of milling operation | TSTAbstractMillOp |
TSTMillOpCopy{E6A604F7-77E3-4FDD-8127-D0008C30EF36} |
Operations/MillOperations/Groups.xml |
|
| 4 | TSTFBMMillOpCopy |
Copy of FBM operation | TSTMillOpCopy |
TSTFBMMillOpCopy{D388D796-2038-4A5B-9901-24E5598C9886} |
Operations/MillOperations/FBMMillOp.xml |
|
| 4 | TSTTechOpGroupCopy |
Copy of Group | TSTMillOpCopy |
TSTTechOpGroupCopy{FC2325C8-207C-44D8-8739-023DFD6FCBFB} |
Operations/MillOperations/Groups.xml |
|
| 4 | TSTFeatureSubOp |
Copy of milling operation | TSTMillOpCopy |
TSTFeatureSubOp{6B6DA451-4AAB-40BB-BA25-12BDD5608C50} |
Operations/MillOperations/Groups.xml |
|
| 4 | TSTHoleMachiningOpCopy |
Copy of milling operation | TSTMillOpCopy |
TSTHoleMachiningOpCopy{6DE68897-FC1D-4BAA-83D9-115CBAC08213} |
Operations/MillOperations/HoleMachiningOperation.xml |
|
| 4 | TSTFeatureOpGroupCopy |
Copy of Multiply Group | TSTMillOpCopy |
TSTFeatureOpGroupCopy{B58C46CE-0950-433B-9B67-9DC9ACC550BF} |
Operations/MillOperations/Groups.xml |
|
| 3 | TNCMillOp |
G-code based | TSTAbstractMillOp |
TNCMillOp{D29219B7-4E0B-4457-9EAA-AFF841F00EA9} |
Operations/NCOperation.xml |
|
| 3 | TSTMillOp |
Mill operation | TSTAbstractMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractMillOP.xml |
|
| 4 | TST3DMillOp |
3D milling operation | TSTMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractMillOP.xml |
|
| 5 | TST25DChamferOp |
2.5D chamfer machining | TST3DMillOp |
TST25DChamferOp{5348F6D3-6614-4D94-9B68-819A2BB2082E} |
Operations/MillOperations/Mill25DOp.xml |
|
| 5 | TSTAbstract25DOp |
Abstract 25D operation | TST3DMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/Mill25DOp.xml |
|
| 6 | TST25DWallMachiningOp |
2.5D wall machining | TSTAbstract25DOp |
TST25DWallOp{1B6B649F-B6D8-4E87-A404-D37F69C9EFD1} |
Operations/MillOperations/Mill25DOp.xml |
|
| 6 | TSTAbstract25DPocketOp |
Abstract 25D pocket operation | TSTAbstract25DOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/Mill25DOp.xml |
|
| 7 | TST25DFlatLandOp |
2.5D flat land | TSTAbstract25DPocketOp |
TST25DCoverOp{1AF04854-47C5-4871-9F7A-51EDC18A6E9C} |
Operations/MillOperations/Mill25DOp.xml |
|
| 7 | TST25DPocketingOp |
2.5D pocketing | TSTAbstract25DPocketOp |
TST25DPocketOp{1410C389-2B89-4084-BCFD-E776D55A7F2F} |
Operations/MillOperations/Mill25DOp.xml |
|
| 5 | TSTAbstractContouringOp |
Abstract contouring operation | TST3DMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/CurveOp.xml |
|
| 6 | TST2DContouringOp |
2D contouring | TSTAbstractContouringOp |
TSTCurve2DOp{6779C892-D689-4648-A2E9-AC3A59C25F72} |
Operations/MillOperations/CurveOp.xml |
|
| 7 | TST25DContouringOp |
2.5D contouring | TST2DContouringOp |
TSTCurve2DOp{6779C892-D689-4648-A2E9-AC3A59C25F72} |
Operations/MillOperations/CurveOp.xml |
|
| 7 | KnifeOp2D |
2D knife cutting | TST2DContouringOp |
TSTKnifeOp2D{4F4D1FBA-9781-4627-BE5A-41D465736892} |
Operations/MillOperations/KnifeOp.xml |
|
| 7 | SawingOp2D |
Disc cutting 2D | TST2DContouringOp |
TSTSawing2DOp{B321A122-704F-4D87-BCAF-B6463710C183} |
Operations/MillOperations/Sawing2D6DOp.xml |
|
| 6 | TST3DContouringOp |
3D contouring | TSTAbstractContouringOp |
TSTCurve3DOp{7A2DA7E7-E9D3-42BB-B6A2-A4172DCE4226} |
Operations/MillOperations/CurveOp.xml |
|
| 6 | TSTJetCuttingOp |
Jet cutting | TSTAbstractContouringOp |
TSTCutting2DOp{52822CFE-D63A-4547-B953-8DD583A05102} |
Operations/MillOperations/JetCutting.xml |
|
| 5 | TSTAbstractEngraveOp |
Abstract engrave operation | TST3DMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/EngraveOp.xml |
|
| 6 | TSTEngraveOp |
Engraving | TSTAbstractEngraveOp |
TSTEngraveOp{66F71622-8106-4FE6-9A94-DB337FF15D28} |
Operations/MillOperations/EngraveOp.xml |
|
| 6 | TSTPocketingOp |
Pocketing | TSTAbstractEngraveOp |
TSTPocketOp{BB586C4A-1CE5-44FB-A562-72A595980834} |
Operations/MillOperations/EngraveOp.xml |
|
| 7 | TSTRestPocketingOp |
Area rest milling | TSTPocketingOp |
TSTPocketOp{BB586C4A-1CE5-44FB-A562-72A595980834} |
Operations/MillOperations/EngraveOp.xml |
|
| 5 | TSTStringOp |
Abstract string operation | TST3DMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/PlaneOp.xml |
|
| 6 | TSTAbstractDriveOp |
Abstract drive operation | TSTStringOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/DriveOp.xml |
|
| 7 | TSTFinishingDriveOp |
Drive | TSTAbstractDriveOp |
TSTDriveFinishOp{754E29F6-BC41-4F7B-9B0F-B7F73D8C7218} |
Operations/MillOperations/DriveOp.xml |
|
| 8 | TSTRestFinishingDriveOp |
Finishing drive (rest) | TSTFinishingDriveOp |
TSTDriveFinishOp{754E29F6-BC41-4F7B-9B0F-B7F73D8C7218} |
Operations/MillOperations/DriveOp.xml |
|
| 7 | TSTRoughingDriveOp |
Roughing drive | TSTAbstractDriveOp |
TSTDriveRoughOp{A57D346B-41EA-46AD-B8D6-9E6B921F94A1} |
Operations/MillOperations/DriveOp.xml |
|
| 6 | TSTAbstractPlaneOp |
Abstract plane operation | TSTStringOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/PlaneOp.xml |
|
| 7 | TSTFinishingPlaneOp |
Finishing plane | TSTAbstractPlaneOp |
TSTPlaneFinishOp{DC54E6A4-0E8F-4543-A8E7-CDB48EB54654} |
Operations/MillOperations/PlaneOp.xml |
|
| 8 | TSTPlaneWaterlineOp |
Complex | TSTFinishingPlaneOp |
TSTPlaneWaterlineFinishOp{20DAF2AC-F037-4C3A-9AB0-0BD67D183B85} |
Operations/MillOperations/Waterline.xml |
|
| 9 | TSTRestPlaneWaterlineFinishingOp |
Complex (rest) | TSTPlaneWaterlineOp |
TSTPlaneWaterlineFinishOp{20DAF2AC-F037-4C3A-9AB0-0BD67D183B85} |
Operations/MillOperations/Waterline.xml |
|
| 8 | TSTComplexFinishingPlaneOp |
Finishing plane | TSTFinishingPlaneOp |
TSTPlaneFinishOp{DC54E6A4-0E8F-4543-A8E7-CDB48EB54654} |
Operations/MillOperations/ComplexOp.xml |
|
| 8 | TSTFinishingPlaneOpForOptPlane |
Finishing plane | TSTFinishingPlaneOp |
TSTPlaneFinishOp{DC54E6A4-0E8F-4543-A8E7-CDB48EB54654} |
Operations/MillOperations/ComplexOp.xml |
|
| 8 | TSTRestFinishingPlaneOp |
Finishing plane (rest) | TSTFinishingPlaneOp |
TSTPlaneFinishOp{DC54E6A4-0E8F-4543-A8E7-CDB48EB54654} |
Operations/MillOperations/PlaneOp.xml |
|
| 9 | TSTRestComplexFinishingPlaneOp |
Finishing plane (rest) | TSTRestFinishingPlaneOp |
TSTPlaneFinishOp{DC54E6A4-0E8F-4543-A8E7-CDB48EB54654} |
Operations/MillOperations/ComplexOp.xml |
|
| 9 | TSTRestFinishingPlaneOpForOptPlane |
Finishing plane (rest) | TSTRestFinishingPlaneOp |
TSTPlaneFinishOp{DC54E6A4-0E8F-4543-A8E7-CDB48EB54654} |
Operations/MillOperations/ComplexOp.xml |
|
| 8 | TSTCrissCrossPlaneOp |
Optimized plane | TSTFinishingPlaneOp |
TSTPlaneFinishCrissCrossOp{1C86CE71-94AB-41C7-A60A-4665549CC4C2} |
Operations/MillOperations/PlaneOp.xml |
|
| 9 | TSTRestCrissCrossPlaneOp |
Optimized plane (rest) | TSTCrissCrossPlaneOp |
TSTPlaneFinishCrissCrossOp{1C86CE71-94AB-41C7-A60A-4665549CC4C2} |
Operations/MillOperations/PlaneOp.xml |
|
| 7 | TSTRoughingPlaneOp |
Roughing plane | TSTAbstractPlaneOp |
TSTPlaneRoughOp{B87DEBC4-90A1-425D-AA99-50ACD41749A6} |
Operations/MillOperations/PlaneOp.xml |
|
| 5 | TSTAbstractWaterlineOp |
Abstract waterline operation | TST3DMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/Waterline.xml |
|
| 6 | TSTFinishingWaterlineOp |
Finishing waterline | TSTAbstractWaterlineOp |
TSTWLFinishOp{224A6D80-F3AB-411E-B97A-60F403E98B65} |
Operations/MillOperations/Waterline.xml |
|
| 7 | TSTCombineOp |
Combine | TSTFinishingWaterlineOp |
TSTWLSuperFinishOp{50AB77F3-9CBF-4A99-9B55-303D668AF7DC} |
Operations/MillOperations/Waterline.xml |
|
| 7 | TSTComplexFinishingWaterlineOp |
Finishing waterline | TSTFinishingWaterlineOp |
TSTWLFinishOp{224A6D80-F3AB-411E-B97A-60F403E98B65} |
Operations/MillOperations/ComplexOp.xml |
|
| 7 | TSTRestFinishingWaterlineOp |
Finishing waterline (rest) | TSTFinishingWaterlineOp |
TSTWLFinishOp{224A6D80-F3AB-411E-B97A-60F403E98B65} |
Operations/MillOperations/Waterline.xml |
|
| 8 | TSTRestComplexFinishingWaterlineOp |
Finishing waterline (rest) | TSTRestFinishingWaterlineOp |
TSTWLFinishOp{224A6D80-F3AB-411E-B97A-60F403E98B65} |
Operations/MillOperations/ComplexOp.xml |
|
| 6 | TSTRoughingWaterlineOp |
Roughing waterline | TSTAbstractWaterlineOp |
TSTWLRoughOp{E1BE2969-DCF9-4C3B-B131-3235D8C70565} |
Operations/MillOperations/Waterline.xml |
|
| 7 | TSTFlatLandFinishingOp |
Flat land | TSTRoughingWaterlineOp |
TSTWLFlatLand{9661814C-985F-4EC1-B0CE-417E88CA49EE} |
Operations/MillOperations/Waterline.xml |
|
| 7 | TSTRestRoughingWaterlineOp |
Roughing waterline (rest) | TSTRoughingWaterlineOp |
TSTWLRoughOp{E1BE2969-DCF9-4C3B-B131-3235D8C70565} |
Operations/MillOperations/Waterline.xml |
|
| 5 | TSTPocketCladdingOp |
Area cladding | TST3DMillOp |
TSTPocketCladdingOp{B91BA08F-8981-45B5-8AF1-9C3B904F31CF} |
Operations/MillOperations/PocketCladdingOp.xml |
|
| 5 | TSTCladding3DOp |
Cladding 3D | TST3DMillOp |
TSTCladdingWaterlineOp{FFDC70E0-D27F-4A84-B1C2-5050BB703B67} |
Operations/MillOperations/Cladding3DOp.xml |
|
| 5 | TSTCurveCladdingOp |
Curve cladding | TST3DMillOp |
TSTCurveCladdingOp{AF410E0B-FC72-4B34-9B6B-85C4A8DABC15} |
Operations/MillOperations/CurveCladdingOp.xml |
|
| 5 | TSTDrillOp |
Hole machining | TST3DMillOp |
TSTDrillOp{5935E15B-69C6-4470-B8B8-8A979877DAA7} |
Operations/MillOperations/DrillOp.xml |
|
| 4 | TSTAbstract5DOp |
Abstract 5D milling operation | TSTMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AbstractMillOP.xml |
|
| 5 | TSTHelicalOp |
3D Helical | TSTAbstract5DOp |
TSTHelicalOp{DC50D55F-DCDB-43FF-9756-F295076193E9} |
Operations/MillOperations/HelicalOp.xml |
|
| 6 | TSTHelicalCladdingOp |
Helical cladding | TSTHelicalOp |
TSTHelicalCladdingOp{ADAAF276-39A0-4408-842A-AA5053316AE8} |
Operations/MillOperations/HelicalCladdingOp.xml |
|
| 5 | TSTUni3dOp |
3D Surfacing | TSTAbstract5DOp |
TSTUni3dOp{94D51F4A-BFFB-485C-83DF-23ACB2C94D60} |
Operations/MillOperations/Uni3DOp.xml |
|
| 5 | TSTWaterJetCutting4d |
4D Jet cutting | TSTAbstract5DOp |
TSTWaterJetCuttingOp{776687C7-3A2D-41C0-88F6-FA0419F9C62D} |
Operations/MillOperations/WaterJetCuttingOp.xml |
|
| 5 | ToolEnd5DMachiningOp |
5D Contouring | TSTAbstract5DOp |
TSTIso5DOp{F1566DB8-C27B-48A8-AC02-6B5C58412EC8} |
Operations/MillOperations/ToolEnd5DMachining.xml |
|
| 6 | ToolEnd4DMachiningOp |
4D Contouring | ToolEnd5DMachiningOp |
TSTIso5DOp{F1566DB8-C27B-48A8-AC02-6B5C58412EC8} |
Operations/MillOperations/ToolEnd5DMachining.xml |
|
| 6 | KnifeOp5D |
6D Knife cutting | ToolEnd5DMachiningOp |
TSTKnifeOp5D{3D34BF2B-863D-418A-BC2E-C241D48AB15C} |
Operations/MillOperations/KnifeOp.xml |
|
| 6 | ChamferingMillOp |
Chamfering | ToolEnd5DMachiningOp |
TSTChamferingOp{D98363DF-DE21-4A51-A4C6-412FAFF382DD} |
Operations/MillOperations/ChamferingOp.xml |
|
| 6 | SawingOp5D |
Disc cutting 6D | ToolEnd5DMachiningOp |
TSTSawing5DOp{C9B37EDE-41A2-4464-BA7B-42F171CC446E} |
Operations/MillOperations/Sawing2D6DOp.xml |
|
| 6 | TCutting5DOp |
Jet cutting 5D | ToolEnd5DMachiningOp |
TSTCutting5DOp{74C4D06A-D78B-4A60-A8C1-FE39A4CC6E37} |
Operations/MillOperations/ToolEnd5DMachining.xml |
|
| 6 | SawingOp |
Sawing | ToolEnd5DMachiningOp |
TSTSawingOp5D{F4903DDF-32B7-4461-952C-28321A5FF105} |
Operations/MillOperations/Sawing.xml |
|
| 5 | TSTMultiAxisOp |
5D Roughing waterline | TSTAbstract5DOp |
TIntMillOP{05436516-7F64-4BA5-8DBF-D98BCDE2B76F} |
TIntMillOP{956D4402-BF52-4218-B3A3-52456DEA634C} |
Operations/MillOperations/MultiaxisOp.xml |
| 5 | TSTUni5DOp |
5D Surfacing | TSTAbstract5DOp |
TSTUni5DOp{4E14343C-CB17-49B7-B833-813991124283} |
Operations/MillOperations/Uni5DOp.xml |
|
| 6 | TSTUni4DOp |
4D Surfacing | TSTUni5DOp |
TSTUni5DOp{4E14343C-CB17-49B7-B833-813991124283} |
Operations/MillOperations/Uni5DOp.xml |
|
| 6 | TSTCladding5DOp |
Cladding 5D | TSTUni5DOp |
TSTCladding5DOp{AF57AC8F-671A-4A20-A618-C41C043CD8A7} |
Operations/MillOperations/Cladding5D.xml |
|
| 7 | TSTSurfaceSprayOp |
Surface spraying | TSTCladding5DOp |
TSurfaceSprayingOp{9E7F6C12-BFF7-40B6-A894-8A6F88880391} |
Operations/MillOperations/SprayPainting.xml |
|
| 6 | TSTUni5DOp4D |
Rotary waterline | TSTUni5DOp |
TSTUni5DOp4D{C94FD54D-0284-4FED-A7C5-E1B1C63A33CA} |
Operations/MillOperations/Uni5DOp.xml |
|
| 5 | ToolEnd5DMachiningOpTPLinker |
6D Contouring | TSTAbstract5DOp |
TSTiso5DOpTPLinker{430E12DD-8313-4AF3-A5DC-C8E706FE5B62} |
Operations/MillOperations/ToolEnd5DMachiningTPLinker.xml |
|
| 6 | TSTContourSprayOp |
Contour spraying | ToolEnd5DMachiningOpTPLinker |
TContourSprayingOp{9AAB2B58-D711-433D-B34E-3053C5050927} |
Operations/MillOperations/SprayPainting.xml |
|
| 5 | TSTBladeMillingOP |
Blade Milling | TSTAbstract5DOp |
TSTBladeMillingOP{ECCB372B-AC5F-4277-BECF-F3334107E0C6} |
Operations/MillOperations/BladeMillingOP.xml |
|
| 5 | TSTCornerRestMachiningOP |
Corners cleanup | TSTAbstract5DOp |
TSTCornerRestMachiningOP{08E472D8-DAA9-4B74-9F2E-6691DE2383B4} |
Operations/MillOperations/CornerRestMachiningOP.xml |
|
| 5 | TSTDiscRoughingOp |
Disc Roughing | TSTAbstract5DOp |
TSTDiscRoughingOp{9020A57A-1B99-4C10-8B5F-0C3995F5AA14} |
Operations/MillOperations/DiscRoughingOp.xml |
|
| 5 | HoleMachiningOp |
Hole machining | TSTAbstract5DOp |
TSTDrillOp5D{7754D5E8-B04D-45CC-8904-76BD02E6051C} |
Operations/MillOperations/HoleMachiningOperation.xml |
|
| 6 | LatheHoleMachiningOp |
Lathe hole machining | HoleMachiningOp |
TSTHoleLatheMachiningOp{AFB34779-8CA1-4729-AD46-39C246237FD5} |
Operations/MillOperations/HoleMachiningOperation.xml |
|
| 5 | TSTImpellerMachiningOp |
Impeller Machining | TSTAbstract5DOp |
TIntMillOP{05436516-7F64-4BA5-8DBF-D98BCDE2B76F} |
TIntMillOP{E34276BE-0345-4053-8D5F-8F540ADE793F} |
Operations/MillOperations/ImpellerMachiningOp.xml |
| 5 | TSTFBMMillOp |
Mill features machining | TSTAbstract5DOp |
TFBMMillOp{3BE9B3B3-65B7-4C40-A135-C8BAA3E69AB0} |
Operations/MillOperations/FBMMillOp.xml |
|
| 5 | TAbstractProbingOp |
Mill part probing | TSTAbstract5DOp |
TSTMeasuringOp{CDCF31D1-89AF-4099-B9FD-C0F3F505DCC7} |
Operations/MillOperations/MeasuringOp.xml |
|
| 6 | TMillPartProbingOP |
Part probing | TAbstractProbingOp |
TMillPartProbingOp{3357DF18-9BAD-413A-94AA-F660798DCB95} |
Operations/MillOperations/MeasuringOp.xml |
|
| 6 | TMillToolProbingOP |
Tool probing | TAbstractProbingOp |
TMillToolProbingOP{30DDF150-F104-48C9-A7A8-1451A5A4BA94} |
Operations/MillOperations/MeasuringOp.xml |
|
| 6 | TAbstractTurnProbingOp |
Turn probing | TAbstractProbingOp |
TSTTurnMeasuringOp{6BC13F5D-52DF-437C-990B-F1FB5719D177} |
Operations/MillOperations/MeasuringOp.xml |
|
| 7 | TTurnPartProbingOP |
Turn part probing | TAbstractTurnProbingOp |
TTurnPartProbingOP{6A35D2E5-6C73-40F4-937B-415F0E2CFBFE} |
Operations/MillOperations/MeasuringOp.xml |
|
| 7 | TTurnToolProbingOP |
Turn tool probing | TAbstractTurnProbingOp |
TTurnToolProbingOP{2464E142-C74B-42AD-AF19-D605E65F5E97} |
Operations/MillOperations/MeasuringOp.xml |
|
| 5 | TSTMorphOp |
Morph | TSTAbstract5DOp |
TSTMorphOp{50A70FF7-80D3-4D36-A49F-A0A69AF853DE} |
Operations/MillOperations/Contour6dOp.xml |
|
| 6 | TSTMorphOp4D |
Morph 4D | TSTMorphOp |
TSTMorphOp4D{AAB17600-1055-48F4-9C93-27C6E6C63C3C} |
Operations/MillOperations/MorphOp.xml |
|
| 6 | TSTMorphSprayOp |
Morph spraying | TSTMorphOp |
TMorphSprayingOp{2D717258-1107-47E2-87CA-AD3B93D5F15C} |
Operations/MillOperations/SprayPainting.xml |
|
| 5 | TSTNonPlanarPrintingOp |
Non-planar slicing | TSTAbstract5DOp |
TSTNonPlanarPrintingOp{DC4744C8-5990-42C9-B6BC-18777BD89FB8} |
Operations/MillOperations/NonPlanarPrintingOp.xml |
|
| 5 | TSTOrthogonalMachiningOp |
Orthogonal machining | TSTAbstract5DOp |
TSTOrthOp{0FD22D59-BF37-46D2-A7BF-F6F36B88F83D} |
Operations/MillOperations/OrthogonalOp.xml |
|
| 5 | TSTPencilOp |
Pencil | TSTAbstract5DOp |
TSTPencilOp{2A1AD087-60B0-498A-9290-F8F846756839} |
Operations/MillOperations/PencilOp.xml |
|
| 5 | TPointWeldingOp |
Point welding | TSTAbstract5DOp |
TSTPointWeldingOp{587BA0E4-FAA8-46E8-B1AD-25A2A054B585} |
Operations/MillOperations/PointWeldingOp.xml |
|
| 5 | RotaryMachiningOp |
Rotary finishing | TSTAbstract5DOp |
TSTRotaryOp{7362B15E-9DA8-4038-AFA8-BB096A8B8D13} |
Operations/MillOperations/RotaryMachining.xml |
|
| 6 | TSTRotarySprayOp |
Rotary spraying | RotaryMachiningOp |
TRotarySprayingOp{27955057-DB5E-47FC-9630-E5E9BFFED8BB} |
Operations/MillOperations/SprayPainting.xml |
|
| 5 | RoughingRotaryMachiningOp |
Rotary roughing | TSTAbstract5DOp |
TSTRoughingRotaryOp{3DACED8F-10B5-4FB9-8FFC-79E8D36D1B28} |
Operations/MillOperations/RoughingRotaryMachining.xml |
|
| 5 | TSTScallopOp |
Scallop | TSTAbstract5DOp |
TSTScallopOp{AFE96A9B-10E9-4F14-9761-D9EB62D1B61A} |
Operations/MillOperations/ScallopOp.xml |
|
| 6 | TSTGeodesicOp |
5D by meshes | TSTScallopOp |
TSTGeodesicOp{EB52F74F-3B58-403F-82A2-995C532248A5} |
Operations/MillOperations/GeodesicOp.xml |
|
| 5 | TSTSwarfOp |
Swarf | TSTAbstract5DOp |
TSTSwarfOp{0F267035-EBA5-4A74-B389-39719449288A} |
Operations/MillOperations/SwarfOp.xml |
|
| 5 | TSTWaterlineOp |
Undercut waterline | TSTAbstract5DOp |
TSTWaterlineOp{C5678D0B-8C81-4932-997A-FD7AC56B483D} |
Operations/MillOperations/WaterlineOP.xml |
|
| 5 | TWeldingOp5D |
Welding 5D | TSTAbstract5DOp |
TSTWeldingOp{877BAB4B-E53C-4472-9F1C-5A95CD3C7BA8} |
Operations/MillOperations/WeldingOp.xml |
|
| 5 | TWeldingOp6D |
Welding 6D | TSTAbstract5DOp |
TSTWelding6DOp{6546C5E3-1294-419D-88D5-C7899C3D38AE} |
Operations/MillOperations/Welding6DOp.xml |
|
| 4 | TMillOpWithDisabledProps |
Aux Op | TSTMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/AuxOp.xml |
|
| 5 | TSTAbstractPickAndPlace |
Pick and place | TMillOpWithDisabledProps |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
|
| 6 | TPNPbySelectedNode |
TSTAbstractPickAndPlace |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 7 | TPNPwithGripperTool |
TPNPbySelectedNode |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 8 | TPNPCalculator |
TPNPwithGripperTool |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 9 | TPNPwithOutputMode |
TPNPCalculator |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 10 | TPNPwithClamps |
TPNPwithOutputMode |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 11 | TPNPwithTurnTool |
Bar feeding | TPNPwithClamps |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/BarFeeding.xml |
|
| 12 | TSTBarFeeding |
Bar feeding | TPNPwithTurnTool |
TSTBarFeeding{C5B4DA2F-4B75-4E86-A500-EC7D5496BAD9} |
Operations/BarFeeding.xml |
|
| 11 | TSTPointPickAndPlaceOP |
Point Pick and place | TPNPwithClamps |
TSTPointPickAndPlaceOp{64F4FD79-26E6-4669-8CE1-4799842894FA} |
Operations/PointPickAndPlace.xml |
|
| 11 | TPNP2NextOp |
TPNPwithClamps |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 12 | TPNPApproachCorrector |
TPNP2NextOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 13 | TPNPwithPickCS |
TPNPApproachCorrector |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 14 | TPNPwithActions |
TPNPwithPickCS |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 15 | TPNPwithSafeSurf |
TPNPwithActions |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 16 | TPNPwithEngageVectors |
TPNPwithSafeSurf |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 17 | TPNPwithMPL |
TPNPwithEngageVectors |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 18 | TSTPlace2Next |
Place to next stage | TPNPwithMPL |
TSTPlace2Next{C448DE4A-8F0D-40B1-A25D-FD02DA45BF61} |
Operations/PickAndPlace20.xml |
|
| 18 | TPNPwithRemoveWorkpiece |
TPNPwithMPL |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 19 | TSTPickAndPlace |
Pick and place | TPNPwithRemoveWorkpiece |
TSTPickAndPlace{3D9EDEA9-E890-4EEC-B563-043BD999D144} |
Operations/PickAndPlace20.xml |
|
| 12 | TPNPwithSyncSpindles |
TPNP2NextOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 13 | TPNP4SwissLathes |
TPNPwithSyncSpindles |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 14 | TPNPwithTurnEngages |
TPNP4SwissLathes |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 15 | TSTSubTakeoverOp |
Abstract pick-n-place | TPNPwithTurnEngages |
TSTSubTakeoverOp{BC7F9D0D-781C-4651-8468-7340E4456C06} |
Operations/PickAndPlace20.xml |
|
| 15 | TPNPwithCannedCycle |
TPNPwithTurnEngages |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 16 | TPNPwithSyncOp |
TPNPwithCannedCycle |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/PickAndPlace20.xml |
||
| 17 | TSTTakeoverMTM |
Turn take over | TPNPwithSyncOp |
TSTTakeoverMTM{15B80C67-78CE-4F34-9A8B-BD2392203AB4} |
Operations/PickAndPlace20.xml |
|
| 14 | TPNPwithTurnSetupLCS |
TPNP4SwissLathes |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/TurnPNP.xml |
||
| 15 | TTurnPNPwithPickPosition |
TPNPwithTurnSetupLCS |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/TurnPNP.xml |
||
| 16 | TTurnPNPwithReturn |
TTurnPNPwithPickPosition |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/TurnPNP.xml |
||
| 17 | TTurnPNPwithSwissPlace |
TTurnPNPwithReturn |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/TurnPNP.xml |
||
| 18 | TSTTurnPNP |
Sub spindle working | TTurnPNPwithSwissPlace |
TSTTurnPNP{8922288C-7247-470B-85A8-266FE9690AFB} |
Operations/TurnPNP.xml |
|
| 5 | TSTSwissWaitOp |
Wait tool | TMillOpWithDisabledProps |
TSTSwissWaitOp{D7DCF7B3-9F48-4DA9-985B-6063F28F51F1} |
Operations/AuxOp.xml |
|
| 4 | TSTFaceMillingOp |
Face Milling | TSTMillOp |
TSTFaceMillingOp{F4DE00D1-7AE3-468E-BA5C-ED3C8275CBF8} |
Operations/MillOperations/FaceMillingOp.xml |
|
| 3 | TAbsWireEDMContouringOp |
Wire EDM Contouring | TSTAbstractMillOp |
TSTAbstractTechOp{AA0BC156-ECA0-45A4-A74D-D705E890F9F3} |
Operations/MillOperations/WireEDMContouring.xml |
|
| 4 | WireEDM2dContouringOp |
Wire EDM 2D Contouring | TAbsWireEDMContouringOp |
TSTWireEDM2dOp{7F43BE1B-8915-47B9-805C-64EB234343C7} |
Operations/MillOperations/WireEDMContouring.xml |
|
| 4 | WireEDM4dContouringOp |
Wire EDM 4D Contouring | TAbsWireEDMContouringOp |
TSTWireEDM4dOp{296FBA85-2C25-439C-83C5-AB5037034988} |
Operations/MillOperations/WireEDMContouring.xml |
|
| 1 | TSTTechOpGroup |
Operations group | TOperationDescriptor |
TSTTechOpGroup{F36447FB-EB16-4A8A-8190-1DB64431F6A0} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTFBMRootGroup |
FBM Mill | TSTTechOpGroup |
TSTFBMRootGroup{93B9EADA-2102-45A1-B184-E368CAC8F32D} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTTechMillOpGroupRaw |
Group | TSTTechOpGroup |
TSTTechMillOpGroupFin{857E6E2C-76ED-4B69-8A88-7535346A4E88} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTTechMillOpGroupFin |
Group | TSTTechOpGroup |
TSTTechMillOpGroupFin{857E6E2C-76ED-4B69-8A88-7535346A4E88} |
Operations/MillOperations/Groups.xml |
|
| 3 | TSTComplexFinishingOp |
Finishing complex | TSTTechMillOpGroupFin |
TSTComplexFinishingOp{F55EC5B0-BA4A-483A-87BB-B027D80C806C} |
Operations/MillOperations/ComplexOp.xml |
|
| 4 | TSTRestComplexFinishingOp |
Complex (rest) | TSTComplexFinishingOp |
TSTComplexFinishingOp{F55EC5B0-BA4A-483A-87BB-B027D80C806C} |
Operations/MillOperations/ComplexOp.xml |
|
| 3 | TSTOptimizedPlaneOp |
Finishing optimized plane | TSTTechMillOpGroupFin |
TSTOptimizedPlane{48878E1A-E7EF-43AD-800B-BA9AFEA6FE5E} |
Operations/MillOperations/ComplexOp.xml |
|
| 4 | TSTRestOptimizedPlaneOp |
Optimized plane (rest) | TSTOptimizedPlaneOp |
TSTOptimizedPlane{48878E1A-E7EF-43AD-800B-BA9AFEA6FE5E} |
Operations/MillOperations/ComplexOp.xml |
|
| 3 | TSTRootGroup |
Machine | TSTTechMillOpGroupFin |
TSTRootGroup{815B30BF-4E80-4337-A6D0-D58C80526F7D} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTTechMillOpGroupRest |
Group | TSTTechOpGroup |
TSTTechMillOpGroupFin{857E6E2C-76ED-4B69-8A88-7535346A4E88} |
Operations/MillOperations/Groups.xml |
|
| 3 | TSTMultiplyGroup |
Multiply group | TSTTechMillOpGroupRest |
TMultiplyGroup{97D77FBC-0046-4A1C-8819-64D2CACC0042} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTFeatureOpGroup |
Multiply Group | TSTTechOpGroup |
TSTFeatureOpGroup{8C369EA7-83E9-4B8B-BE7C-365714A96CAF} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTStageOpGroup |
Setup stage | TSTTechOpGroup |
TSTStageOpGroup{16253702-D621-4ABA-AE09-1BAA3F59D937} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTTombOpGroup |
Tomb group | TSTTechOpGroup |
TSTTombOpGroup{072E54DE-A8A5-4028-B3D0-E1FC5D0FC03A} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTCustomPartOp |
TSTTechOpGroup |
TSTPartOpGroup{2802AC38-B264-47F5-897A-55C520C19F67} |
Operations/MillOperations/Groups.xml |
||
| 3 | TSTPartOpCopy |
Copy of part | TSTCustomPartOp |
TSTPartOpCopy{B40179A7-FDE6-4428-B44E-967867CA47AF} |
Operations/MillOperations/Groups.xml |
|
| 3 | TSTPartOpGroup |
Part | TSTCustomPartOp |
TSTPartOpGroup{2802AC38-B264-47F5-897A-55C520C19F67} |
Operations/MillOperations/Groups.xml |
|
| 2 | TSTFBMOpGroup |
TSTTechOpGroup |
TSTFBMOpGroup{5ED0E2BA-19EB-45AD-B3E5-6D68E972A1DC} |
Operations/MillOperations/Groups.xml |
Back to Operation XML descriptors | index