Feedrate <FEDRAT>

<FEDRAT> defines the value and the type of tool feed. The feed value is stored until the next <FEDRAT> command or <RAPID> command.

CAM system uses <FEDRAT> to pass the machining condition code.

Command:

FEDRAT NM nm, K k, MMPM(315) | MMPR(316)

Parameters:

Parameter	CLD array		Description
nm	CLD[1]	CLD.NM	Feed value.
k	CLD[2]	CLD.K	Feed type (work feed, approach feed, retract feed, transition feed, cut-in feed, etc.). 0 - working, 2 - first pass feed, 4 - engage feed, 8 - retract feed, 16 - plunge feed, 32 - finish pass feed 64 - transition to the next pass, 128 - return feed, 256 - approach feed. For EDM operation CAM system uses this parameter to pass machining condition code.
MMPM(315) MMPR(316)	CLD[3]	CLD.MMPM	Feedrate units: MMPM(315) – mm per minute, MMPR(316) – mm per revolution