Lathe facing operation

images/download/attachments/128536183/image2024-3-12_11-55-19.png

Application area:

The operation is designed to prepare the uneven face of workpiece (left or right). The material is removed by the vertical tool motions stroke by stroke.

Setup:

The Setup tab is used to configure the primary parameters of the project. This can involve the positioning of the part on the equipment, the coordinate system of the part, and more. See more

Job assignment:

Facing. This allows programming the machining of the end face of a workpiece with a single command. The trajectory is formed in the same way as when specifying Contour or Contour Repeat cycles. However, the trajectory is automatically calculated based on the current blank and workpiece, ensuring correct machining of either the left or right end face. See more

Properties. Displays the properties of an element. It is possible to add the stock. You can also call this menu by double clicking on an item in the list.

Delete. Removes an item from the list.

CycleParams:

This parameter group works similarly to the OD Roughing and ID Roughing operations. See more

Transformations:

Parameter's kit of operation, which allow to execute converting of coordinates for calculated within operation the trajectory of the tool. See more




See also:

Lathe machining operations

Facing cycle

Job assignment