PARTNO - Part number

Command caption

How the command appears in the CLData command list:

PARTNO "<CAM system project name>"

PARTNO is the first command in the list of technology commands of a project. Use PARTNO command to form NC-program initialization block. PARTNO command puts the project name into the CLDATA$ variable.

Access from sppx

Handler: program PartNo

Example (from the Fanuc (30i)_Mill postprocessor):

program PartNo
! Initialization of global variables
  MaxReal = 99999.999
  XT_ = 0;  FROMX_ = 0
  YT_ = 0;  FROMY_ = 0
  ZT_ = 0;  FROMZ_ = 0

  KorEcv = 40; KorEcv@=KorEcv
  KorDl  = 49; KorDl@=KorDl
  Cycle  = 80; Cycle@=Cycle
  Plane  = -17; Plane@=Plane
  GSpindl = 97; GSpindl@ = GSpindl
  CoordSys = 54; CoordSys@ = CoordSys; WCSNumber = 54
  PG = 0; PG@ = PG
  YAddress = "Y"
  IsRotaryInterpolation = 0
  IsMultiaxisInterpolation = 0
  CylR = 0
  Pi = 3.1415926535897932384626433832795
  Deg2Rad = Pi / 180
  Rad2Deg = 180 / Pi
  CirclesThroughRadius = 0
  call check_Euler_angles_types
  IsLocalCS = 0
  G68_2_X = MaxReal
  G68_2_Y = MaxReal
  G68_2_Z = MaxReal
  G68_2_I = MaxReal
  G68_2_J = MaxReal
  G68_2_K = MaxReal
  HasAxisA = 0
  HasAxisB = 0
  HasAxisC = 0

! Constsnt cycles variables
  CycleOn = 0          ! 0 - cycle Off, 1 - cycle On
  KodCycle = 0         ! constant cycle code
  Za = 0               ! work depth
  Zf = 0               ! safe level
  ZP_ = 0               ! reverse move level
  Zl = 0               ! depth of one drilling step
  Zi = 0               ! transitional value
  Dwell = 0            ! pause in constsnt cycles
  Fr = 0               ! work FEED_
! Set machene functions by default
  X = MaxReal; X@=X
  Y = MaxReal; Y@=Y
  Z = MaxReal; Z@=Z
  A = MaxReal; A@=A
  B = MaxReal; B@=B
  C = MaxReal; C@=C
  S = 0; S@=S
  SpDir = 5
  SpRPM = 0
  DrillPause = MaxReal; DrillPause@ = DrillPause;
  QStep = MaxReal; QStep@ = QStep;
  Zcycle=Maxreal; Zcycle@=Zcycle
  P=0;Q=0
  D_=0; H_=0;             ! values D, H
  RapFR  = 2000
  INTERP_ = 100;  INTERP_@ = 100
  Msp = 5; Msp@ = 5     ! spindle off
  Mc=9; Mc@=Mc;
  Zcycle=Maxreal
  OperationIsLathe = 2
  BlkN=100

! Creating NC heading
  output "%"
  MainProgramID = 5
  call GetProgNumberFromName(NCName$,MainProgramID)
  !Input "Input program number:", MainProgramID
!  ProgNum = MainProgramID; ProgNum@ = MaxReal
  FormBlock
  s$ = NCName$
  call CheckProgramName(s$)
  output OutStr$ + UPCASE(s$)

  output ""
  Output "( GENERATED BY CAM )"
  Output "( DATE: " + CurDate + " )"
  Output "( TIME: " + CurTime + " )"

  output ""
  call PrintAllTools
  output ""
  Output "G00G21G40G49G69G80G90G17"
  output "<StartGoHome>"

  OutBlock
end

Access from .NET

Handlers:

public override void OnPartNo(ICLDPartNoCommand cmd, CLDArray cld)
public override void OnStartProject(ICLDProject prj)   // project-level, raised on PARTNO

Inheritance: ICLDPartNoCommand : ICLDCommand.

Read the parameters from the strongly-typed cmd object (recommended); the raw cld[i] array (same indices as in sppx) and the named cmd["..."] helpers are available too. The table lists the command's members, including those inherited from its base interfaces; the common ICLDCommand members (navigation, CLD, CLDFile, TechOperation, ...) are described in the CLData access model.

Member	Type	Description
cmd.ProjectName	string	Returns the project's file name without path and extension.

Example - OnStartProject (from the Fanuc (30i)_Mill_DN postprocessor):

public override void OnStartProject(ICLDProject prj)
{
    probingCycle.Init();

    mainNC = new NCFile();
    nc = mainNC;
    nc.OutputFileName = Settings.Params.Str["OutFiles.NCFileName"];
    // Log.Info("Output file name: " + nc.OutputFileName);
    nc.ProgNumber = Settings.Params.Int["OutFiles.NCProgNumber"];
    
    CirclesThroughRadius = Settings.Params.Bol["BlockFormat.CirclesThroughRadius"];
    
    if (Settings.Params.Bol["BlockFormat.Numbering"])
        nc.BlockN.Show();
    else
        nc.BlockN.Disable();
    if (Settings.Params.Bol["BlockFormat.Spaces"])
        nc.Block.WordsSeparator = " ";
    else
        nc.Block.WordsSeparator = "";

    nc.WriteLine("%");
    nc.WriteLine("O" + Str(nc.ProgNumber));

    nc.WriteLine();
    nc.WriteLine(String.Format("( {0} )", "Generated by CAM"));
    nc.WriteLine(String.Format("( {0} )", "Date: " + DateTime.Now.ToShortDateString()));
    nc.WriteLine(String.Format("( {0} )", "Time: " + DateTime.Now.ToShortTimeString()));
    nc.WriteLine();

    PrintAllTools();
    nc.WriteLine();

    nc.Block.Show(nc.GAbsInc, nc.GFeed ,nc.GMeasure, nc.GWCS, nc.GLCS, nc.GPlane, 
        nc.GLCompens, nc.GRCompens, nc.GInterp, nc.GCycle);
    nc.Block.Out();
    nc.OutWithN("G53", nc.Z.ToString(0));
    OutG53ABC();
}

See also

• CLData access model